Fall Sale!! Up to 25% Select Buildings
We source materials exclusively from trusted American partners.
Each order is tailored to your precise specifications and local standards.
Our experienced installers will construct your building onsite to perfection.
Our panels are 29 gauge steel. Available in standard lengths of 21', 26', 31', and up to 36' in certain areas. We have 14 colors available to choose from. Custom lengths are available upon request.
A transition piece covering the ridge of the roof. The ridgecap is normally color matched with the roof panels. However, if the customer wishes to change the color it must be specified when completing your order.
A galvanized steel component that is used to create a vertical roof orientation. The hat channel also provides more ridgidnes for a stronger structure.
A single piece of square tubing used to make the roofing member of a building. The tubing can be made from either 14 gauge or a 12 gauge steel.
Braces are U-shaped channels that are used to reinforce the structure of a building. For buildings in which the braces are optional we recommend 2' braces on buildings shorter than 8' and 3' braces for buildings 9' or taller.
The square tubing on the base of the building onto which the legs are attached to.
Legs are the vertical tubing that connect the bows (top) to the base rail (bottom). The leg height varies depending on the type of building.
Trim to give the roof and building corners a finished and a more asthetic view.
Vertical Roof Style is the most durable as well as the most traditional style of metal roof. Its vertically aligned panels allows for better water and debris shed. Its construction with hat-channel and paneling on top make this the strongest roof style we offer.
The original style offered in the carport industry, this is where it all started! Featuring rounded eves, this is our most economical roof style available. The roofing panels run front to back.
Supreme Buildings' products are engineer-certified to comply with your state's regulations. Should you need additional features like enhanced snow load capacity or wind resistance, we can provide engineer certification at the customer's request. We're always open to customizing buildings to your specifications. Furthermore, we offer standard building plans at no additional cost for most standard structures.
Supreme Buildings offers a 20-year warranty from the date the installation is completed, covering rust through on the framing of 12 gauge materials, assuming standard user care and maintenance. This warranty is not applicable to 14 gauge materials. Moreover, galvanization enhances both the lifespan and aesthetic of your subsequent structure.
Recognizing the challenges of hiring contractors, Supreme Buildings installs your steel building on your level land without any additional charges. Rest assured, we support our customers throughout the entire process
Strength Endures. With our optional wind warranty packages, your structure is ensured to resist intense winds, straightforwardly. Wind warranty options begin at 100 mph and above.
Supreme Buildings enhances its metal buildings with braces at every corner and the center of each truss. These reinforcements ensure your structure remains both square and sturdy, providing added strength and preventing roof collapse.
With our 4-season craftsmanship guarantee, Supreme Buildings stands by its product all year round. Your metal structure is safeguarded against natural elements, be it heavy snowfall, severe winds, intense heat, or any other seasonal challenges. We've got you covered. Supreme Buildings provides a warranty for 1 year from the date of full installation against workmanship defects, assuming standard user care and maintenance. Refer to the contract for more specifics.
Sometimes referred to as wedge anchors, contractors drill into the concrete and insert the anchor to fasten the building very securely to the concrete pad.
Used in combination with every other anchor style except for concrete. Rebar anchors hold the baserail in place during construction to insure a sturdy installation.
Also known as Mobile Home Anchors
Used to secure the building in ground installations only.
They are double helical in design.
Used in asphalt installations only. They have 4 fins that when driven into the ground hold the anchor in keeping the building secure during high wind conditions.
You can choose any color for roof, siding, trim, and wainscoting at no extra cost!
Ready to take the next step? Fill out our simple form to receive a personalized price quote for your ideal metal building. Let’s bring your vision to life – affordably, efficiently, and tailored to your specific needs.
